Armoloy Coatings for Metal Stamping

High Rc Chromium Coating Technology

Armoloy of Western PA offers wear coatings (TDC and XADC) for the metal forming industry. The coatings will harden up the surface of the base metal and reduce the coefficient of friction. The most commonly served industries are metal stamping, roll forming, steel mill equipment, die casting, metal injection molding and sintered metals.

Metal Stamping applications show sharper cuts, no burrs and smoother finishes. Progressive dies can be sharpened after dulling occurs by introducing new Armoloy to the edge. Hex head trim dies show sharper cuts and smoother finishes whether used in hot or cold heading operations.


Benefits to metal forming industry:

  • Increased lubricity
  • Sharper cuts
  • No burrs
  • Smoother finishes
  • Reduced pick-up and galling
  • Can be sharpened without stripping
  • Won't anneal or cause distortion of the base metal
  • Applied at 130F - 140F
  • Won't crack, chip, or peel

    Proven applications:

  • Blanking
  • Forming
  • Draw
  • Trim
  • Progressive
  • Roll thread dies
  • Punches
  • Coining
  • Hot or cold heading
  • Blanking dies
  • Forming dies
  • Punching
  • Draw dies
  • Progressive dies
  • Extrusion dies
  • Trim dies
  • Seaming Chucks
  • Roll thread dies
  • Coining
  • Tension levelling
  • Skin pass mills
  • Galvanizing line
  • Duo mills
  • Tandem mills
  • Pickler lines
  • Slitter lines
  • Coil build-up lines
  • Cavities
  • Cores
  • Pins